One of the incredible features of the Emblaser 2 is true 3D cutting & engraving. You can automatically adjust the height of the laser while cutting and engraving to gain an extra dimension of control. Cut through thicker materials by setting your laser to automatically lower with multiples passes.
Create 3D engravings with depth or automatically adjust the sharpness of your laser to create sharp lines or soft fills.
‘Material Ignition Alert’, or ‘MIA’ constantly monitors for the potential ignition of a material, a situation that may arise in any laser cutter. If detected, MIA places the machine is a safety mode and sounds a warning alarm.
Air-Assist increases cutting performance and creates cleaner cuts by injecting a stream of high pressure air into the cutting region. Traditionally only available in industrial machines, the Emblaser 2 comes ready to accept our air-assist accessory.
Here is difference air-assist can make on various materials. The left cut is without air-assist running.
|Fabric – Cotton||3mm||Y||Y|
|Fabric – Felt||6mm||N||Y||All colours except white.|
|Leather – Vegetable Tanned||4mm||Y||Y||Treatment & color dependant.|
|Paper/Card – Corrugated Cardboard||6mm||Y||Y|
|Paper/Card – Pasteboard||2.6mm||Y||Y|
|Paper/Card – Plain Paper||3mm||Y||Y||Any colour.|
|Plastic – Acrylic Black||5mm||Y||Y|
|Plastic – Acrylic Green, Red Yellow||3mm||Y||Y|
|Plastic – Acrylic Translucent (tinted)||–||Y||N|
|Plastic – Acrylic Blue||–||Y||N|
|Plastic – Acrylic Transparent & White||–||N||N||Possible with coating.|
|Plastic – Polypropylene||3mm||Y||Y||Air-Assist recommended.|
|Wood – Poplar Plywood||6mm||Y||Y|
|Wood – Balsa||10mm||Y||Y|
|Wood – MDF||3mm||Y||Y|