UP BOX+ with HEPA filtration

air filtration HEPA for 3d printer fumes UFP VOCicon-fast_printing_speedicon-power outageout_of_filament_detection




$3,357.20$4,833.68 excl GST


Safety First

HEPA air filtration system to clean the print chamber of particle emissions


Create Super-Sized Parts

The UP BOX+ packs a punch with its enormous LED-lit build volume, allowing you to create multiple parts in one go or just huge 3D prints.


Power Loss Recovery

Mid-printing a 10+ hr project and suddenly hit by a power cut?

Simply power up the printer again and resume the print where it left off!


Automatic Filament Pause

When the printer runs out of filament, it will automatically pause the job.

Just reload a new spool and carry on printing! No more half printed models.


Control your printer wirelessly!

Whether you’re in the same room or a different room.

Control your UP BOX+ without being tethered to the computer!

your UP BOX+

Safety First

Look after yourself

No matter what printer you are using, Ultra Fine Particles (UFP) will be produced; after all, we are melting plastic. A basic requirement for all 3D printers is to have an enclosed print area, but it is simply not enough to keep you from being exposed to the emissions. Unless you have installed a venting system yourself, the UFP will still be present in the enclosed print chamber.

Now, here’s the what sets the UP BOX+ apart from other FDM 3D printers: UP Air Filter system. The UP Air Filter is an advanced, two-in-one system made up of the HEPA filter and Active Carbon Filter that constantly works to draw in the UFP and VOC emitted during printing.

HEPA Filter - UP BOX or Mini 2

Last 300hrs / 3 months of printing

All 3D printers when printing with ABS or PLA have been characterized as high emitters of Ultra Fine Particles.
Having a 3d printer with HEPA air filtration system can dramatically reduces exposure by around 93%, especially in an office or classroom environments.

Having a 3D printer with HEPA air filtration system can dramatically reduce exposure, especially in an office or classroom environments.
The UP BOX’s HEPA filter and enclosed print area reduce up to 91% of the UFP emissions.

Ideal for the Prosumer

Professional parts at your fingertips

The UP BOX+ 3D Printer can print professional (100 micron HD detail), huge, tough and functional parts faster and more affordable right on your desk. Switch between different nozzles to achieve high-quality parts that are comparable to large industrial 3D printers.

A fully-enclosed unit, the UP BOX+ is imbued with an industrial touch with its internal steel chassis, mingled with a sleek and modern external body.

Have one in the office, classroom or the workshop; it’s truly a sophisticated piece of manufacturing equipment.

up box 3d printing hd resolution fine layer 50 micron

Rapid prototyping

Print complex & functional parts

Fully functional mechanical gear parts printed with UP 3D printers

The UP BOX+ is engineered to be smart and efficient

Safeguard yourself from unfinished printjobs

Wouldn’t it be devastating to come back to a print job, only to find it is half-finished with an empty space where the rest of your model should be? You know you have the platform and nozzle calibrated to the T and you have been vigilantly cleaned and maintained the printer to tip-top condition. However, there are still some unforeseeable factors outside of your control which might just catch you off guard. The UP BOX+ is equipped with both ingenious software and hardware features to minimise potential risks of incomplete prints.

Pull the plug on power outage woes

You’re on your final leg of a long, long print job; the end is near and it only has about half an hour to go. Suddenly you’re struck by a power cut, you forgot to pay the electricity bill or someone accidentally turned the power off.

Hours, wasted! Filament, wasted!

The new smart feature of the UP BOX+ allows you to pick up from where you left off and finish off the print seamlessly. Users are prompted whether they want to resume the print upon turning the printer back on.

Filament detection function

Running out of filament halfway through a print job is another thorn in our side. Usually, it’s a case of overestimating how much plastic is left on the spool, but it’s a situation that costs you time and money.

Most 3D printers will keep printing because it doesn’t know that and you end up with a model with a whole chunk missing. Luckily, the UP BOX+ is smarter than that because we have fitted it with a filament detection system that automatically pauses the print when activated.

This gives you the window of opportunity to save your progress by simply loading in a new spool and resuming the print from where it left off.


Wireless Connectivity

Control UP BOX+ 3D printers wirelessly with wifi network

Printer in the garage or workshop but the computer is in the study? Run out of USB connection ports? You can now connect and control your UP BOX+ 3D printer remotely via WiFi. This will give you, as a user, the ability to print without being in the same room.

All you need to do is set-up your UP BOX+ to join the same network as your computer or device with WiFi access and you’re good to go. Too easy!

No more being tethered to the computer; make your workspace and floor cable-free.


UP Studio

Import. Adjust. Print.

The UP Studio software is packed with a number of tools which allows for some simple yet effective way of controlling how you print with your UP BOX+:

  • Scale, Move, Rotate
  • Duplicate and merge models
  • Create custom printing profiles – With any of the UP printers you are not locked down to proprietary filaments. If you have other filaments with different printing properties, you can create customised temperature settings for the platform and nozzle suitable for the filament.
  • Reprint the last model or store up to 10 files with saved printing settings
  • Wireless setup
  • Simple 2D image to 3D lithophane converter

Control at the palm of your hand

Are you using an iPad? The newest software, UP Studio, has made it that much easier to wire up your iPad to the UP BOX+, without actual wires! How awesome is that?

You can control the printer straight from your iPad! Simply connect your printer to the iPad via WiFi. Just download the app for your iPad from Apple App Store and have the ability to print with your UP BOX+ at your finger tips

ipad iphone icon

What’s in the package:

  • UP BOX+ 3D Printer
  • 1 x roll of 500g UP ABS filament
  • Various tools: scraper, cutters, nozzle wrench etc.
  • 1 x Perforated Board
  • 1 x Perforated Board with UP Flex sheet
  • Power Supply 220v
  • Filament samples
Scroll to Top